# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # Config file for /etc/init.d/flowcap # This is the default and should be left unless you know what you are doing FLOW_VER=5 # local ip. if configured flow-capture will only ps flows sent to this ip. LOCALIP=0 # You probably don't want to change this, but in case you do - nest level NEST=0 # port to listen on PORT=2055 # remote ip. If this is configured only flows from this exporter will be accepted # by default we will accept any flows sent to us REMOTEIP=0 # program used to rotate ROTATE_PROG="/var/lib/flows/bin/linkme" # number of rotations per day ROTATIONS=287 # Retain the maximum number of files so that the total storage is less than SIZE # The letters b,K,M,G can be used as multipliers, ie 16 Megabytes is 16M. SIZE=1G # interval in mins at which flowscan will print out stats in logs #STAT_INT=5 # NOTE: with versions of flow-tools >=0.67 there is a bug that will cause a loop if you specify the STAT_INT # Only use that variable if you using an older flow-tools (and consequently a custom built ebuild as this config file is not in our older ebuilds) # dir we will be saving flows and working in WORKDIR=/var/lib/flows/ft # user to run as USER=flows # Pidfile base # The daemon takes the pidfile argument and APPENDS .$PORT itself in writing. # It may have multiple children by original design, but this is not recommended # for Gentoo at this time. PIDFILE_BASE=${PIDFILE_BASE:=/run/flows/flowcapture.pid} # This pulls in the options above FLOW_OPTS="-p $PIDFILE_BASE -w $WORKDIR $LOCALIP/$REMOTEIP/$PORT -V $FLOW_VER -E $SIZE -n $ROTATIONS -N $NEST -R $ROTATE_PROG" # Use below only if you have sorted out the STAT_INT problem #FLOW_OPTS="-p /run/flows/flowcapture.pid.$PORT -w $WORKDIR $LOCALIP/$REMOTEIP/$PORT -S $STAT_INT -V $FLOW_VER -E $SIZE -n $ROTATIONS -N $NEST -R $ROTATE_PROG"